Diesel Fuel Injection Pump Test Bench

Home

Company

Products

Contact Us

Diesel Fuel Injection Pump Test Stand

DIESEL

TST-A   Fuel Injection Pump Test Bench

MAIN FEATURES:

Quick view the characteristic curve of governor in dynamics. Test pump with the curve of governor.

Map and check the curve of governor (idle , part and full load ). Computer (industrial computer work station)

measure and control. Standard computer and standard ports. Hard disk, Windows XP operating system.

　

   1. Primary motor variable-frequency speed regulation
   2. Rotation speed, count, temperature, air pressure,rack travel,15”/ 17” LCD display in monitor
  3. Iinspecting of timer advanced angle（optional）
　4. Two control system. Computer and instruments. You can select one of them when you operate the test bench.
   5. Speed presetting
　6. Count and temperature setting
　7. VE pump performance inspection
　8. Fuel temperature auto-control
　9. With internal air supply and vacuum
　10.With test bench troubleshooting diagnosis and protection
　11.Available for testing fuel injection pump types:I、II、III、P7、BQ、PW、K、M、MW、A、B、BV、P（ZU、ZW、ZM）、EP/VA、EP/VM、VE…F…
  12.With storage of 200 types fuel pump testing parameters and can be looked into instantly

　Dragging power                  

 5.5/7.5/11/15/18.5kw

　Length×width×*height

 2050×960×1750mm 

　Weight

 800kg-1300kg 

　Voltage / 3 phase

 380/220V(on request)

　Frequency

 50/60hz 

　Speed range

 0-4000rpm/min 

  Speed preseting range  0-4000rpm/min
  Speed control accuracy  ＜±1 rpm

　12v External DC supply 12v

 6A 

　24v External DC supply 24v

 3A

　Center distance height

 125mm

　ISO driving shaft coupling

 120mm

　Measurement points

 12cyl

　Graduate tubes capacity

 45/150/260ml
  Feeding pump  8 L/min

　Oil tank cpacity

 60L

　Advanced angle measurement（optional）

 0-180 o 

  Control rack travel measurement（optional）

 0-30mm
  Lubrication oil circuit for caterpillar（optional） 　

　Low pressure

 0-0.4mpa

　High pressure

 0-4 mpa

　Air pressure

 -0.03-0.3 mpa

　Pump internal pressure

 0-1.6 mpa

　Vacuum

 -0.1-0 mpa

　Heater power

 2 kw

　Fuel temperature regulation range /autocontrol

 30-65 ℃

　Test oil cooling

 Heater exchanger

　Color of test bench

 Green /yellow /blue

MAIN FUNCTIONS:

   Checking of the advance device in dynamics.

   Measurement of each cylinder's delivery at any speed. 

   Checking of each cylinder's injection timing with static. 

   Measurement of rack travel at any speed.

   Checking of the LDA. 

   Checking of the mechanical governor. 

   Checking of the pneumatic governor. 

   Checking of the vacuum capacity of governor. 

   Measurement of the internal pressure of VE pump body. 

   Measurement of the reflux delivery of VE pump.

   Testing of the electro-magnetic valve of VE pump. 

   Checking of the feed pump. 

   Checking of the sealing of injection pump body.


BACK　 /**/