Engine Oil for Two Wheelers Important Features

When to change your engine oil

Since engine oil is critical for smoother and efficient functioning of your two-wheeler you should pay heed to the following signs while riding -

Excess engine exhaust

Increased engine noise

Increased noise while starting

Low mileage or higher fuel consumption

How to change your engine oil

If you start noticing any of the above signs in your two-wheeler, then it is time to change your engine oil. Here is how you can do the same -

Completely drain the old engine oil.

Ensure that all residue has been removed from the reservoir.

Replace with oil of the grade recommended by the bike manufacturer.

In case you are only topping up, never mix different grades of engine oils.

Features of engine oils for two-wheelers

Engine oils for two wheelers are classified into three types: synthetic, semi-synthetic, and mineral. The three categories vary in terms of price and functionality.

Lubrication

The primary function of engine oil is to provide adequate lubrication to all the internal engine components. By coating two moving parts with a slick film, the oil reduces friction. The oil pump must provide a continuous flow of oil to all engine maintaining a layer on the engine component to minimize stress. Viscosity of the oil is an important criterion in the performance of an engine oil.

Cleansing

All engine oils are made up of two main components: base oil and additives. While the base oil aids in lubrication, the additives protect the engine by assisting in the cleaning process. The additives present in the oil help to remove the carbon formation that has accumulated on the engine parts. A fresh batch of engine oil refreshes the entire system by removing any build-up on the engine parts.